The core principle for cleaning and disinfecting glass bottles is to thoroughly remove contaminants before proceeding to disinfection. Throughout the process, it is essential to avoid sudden temperature changes-which can cause the glass to shatter-and to prevent re-contamination. Below are safe, effective methods for various scenarios:
Deep Pre-Cleaning (Must be completed before disinfection)
Complete Disassembly: Remove all components, including lids, sealing rings, and straws. Rinse items within 30 minutes of use to prevent residue from drying and hardening on the surfaces.
Thorough Scrubbing: Use a soft-bristled brush and a neutral, food-grade detergent. Pay special attention to hard-to-reach areas such as the threads of the bottle neck, the curves at the base, and the interior of the lid. Never use steel wool or other abrasive tools, as scratches can weaken the glass and increase the risk of it shattering.
Rinse Thoroughly: Rinse the bottle 3–4 times under running water until no water droplets cling to the walls and no traces of soap remain. Any residual debris could trap bacteria, rendering the disinfection process ineffective.
Safe, Common Home Disinfection Methods
Boiling (The Most Reliable Method)
Place the glass bottles in a pot of *cold* water, ensuring they are completely submerged. Bring to a boil and maintain for 5–10 minutes. For silicone or plastic components, add them only after the water has reached a boil, and remove them after 3 minutes to prevent heat-induced degradation.
Ensure the glass bottles do not come into direct contact with the sides or bottom of the pot, as localized overheating can cause them to crack. Once finished, remove the bottles using clean tongs and place them upside down on a drying rack to air-dry.
Steam Disinfection (Best for Protecting the Glass)
Place the cleaned glass bottles-opening side down-into a dedicated steam sterilizer and follow the manufacturer's instructions (typically 10–15 minutes). High-temperature steam (100°C) penetrates every crevice; unlike boiling, this method eliminates the risk of bottles bumping against each other, making it the gentlest option for the glass. Immersion in 75% Alcohol (for emergency use)
Submerge thoroughly cleaned glass bottles in 75% medical-grade alcohol for 30 minutes. Remove the bottles, drain any residual alcohol, and allow them to air-dry for 15 minutes. Finally, rinse them twice with cooled, previously boiled water. This method is suitable for narrow-mouthed glass bottles and is effective at rapidly eliminating common bacteria.

