The primary materials used for plastic bottle packaging are PET, HDPE, and PP. The numbers 1 through 7, found inside a triangle on the bottom of the bottles, are resin identification codes mandated by national standards; these indicate the specific properties and safe usage limits for each material.
Characteristics and Applications of Each Material
No. 1 PET (Polyethylene Terephthalate): Most commonly used for mineral water and carbonated beverage bottles. While highly transparent, it has a heat resistance limit of only 70°C; exceeding this temperature can cause deformation and the potential release of harmful substances. It is not recommended for repeated refilling with hot water or for the long-term storage of cooking oil.
No. 2 HDPE (High-Density Polyethylene): Frequently used for cleaning supplies, body care products, and milk jugs. It can withstand temperatures up to 110°C. Food-grade versions are safe for food storage, though reuse is not advised if the container cannot be thoroughly cleaned.
No. 3 PVC (Polyvinyl Chloride): Rarely used for food packaging; more commonly found in items like raincoats and construction materials. It can release toxic substances when heated and should not come into contact with food products.
No. 4 LDPE (Low-Density Polyethylene): Often used for plastic wrap (cling film). It has poor heat resistance and will begin to melt above 110°C; therefore, it should not be used to wrap food that is then heated in a microwave.
No. 5 PP (Polypropylene): The only type of plastic safe for use in a microwave. It can withstand temperatures up to 130°C and is commonly used for soy milk bottles and microwaveable food containers. It can be reused after proper cleaning.
No. 6 PS (Polystyrene): Used for items such as instant noodle bowls and fast-food containers. It is not heat-resistant, cannot be used in a microwave, and is unsuitable for holding hot food-especially items that are highly acidic or alkaline.

